Speedaire; Personal Safety - Speedaire 4XP65B Mode D'emploi

Speedaire Operating Instructions

Speedaire

General Safety Information
E
(Continued)
N
G

PERSONAL SAFEty

L
I
l Use a face mask/
S
respirator and protective
H
clothing when spraying.
Always spray in a well
ventilated area to
prevent health and fire hazards.
Refer to Material Safety Data Sheets
(MSDS) of spray material for details.
l Always wear eye
protection
l Never use oxygen, corbon
dioxide, combustible
gases or any bottled gas as an air
source for the spray gun. Such gases
are capable of explosion and serious
injury to persons.
l Do not misuse this product. Excessive
exposure to vibration, work in
awkward positions, and repetitive
work motions can cause injury to
hands and arms. Stop using any tool
if discomfort, numbness, tingling or
pain occur, and consult a physician.
l Never aim or spray at yourself or
anyone else or serious injury could
occur.
l Do not spray acids, corrosive
materials, toxic chemicals, fertilizers
or pesticides. Using these materials
could result in death or serious
injury.
Gravity Feed Spray Gun
®
l When spraying and cleaning, always
follow the instructions and safety
precautions provided by the material
manufacturer (Refer to MSDS).
l Do not overreach.
Keep proper footing
and balance at all
times. Proper footing
and balance enables
better control of the spray gun in
unexpected situations.
l Stay alert. Watch what you are
doing and use common sense
when operating the spray gun. Do
not use the spray gun while tired
or under the influence of drugs,
alcohol, or medication. A moment
of inattention while operating the
spray gun increases the risk of injury
to persons.
tOOL USE AND CARE
l Do not use pressure
that exceeds operating
pressure of the spray
gun or any of the parts
(hoses, fittings, etc.) in
the painting system.
l Over pressurizing the spray gun is
able to result in bursting, abnormal
operation, breakage of the spray
gun or serious injury to persons.
l Always verify prior to using the spray
gun that the air source has been
adjusted to the rated air pressure or
within the rated air-pressure range.

l Check for misalignment or binding
of moving parts, breakage of
parts, and any other condition that
affects the spray gun's operation.
If damaged, have the spray gun
serviced before using. Many
accidents are caused by poorly
maintained spray guns. There is a
risk of bursting if the spray gun is
damaged.
l Avoid unintentional starting. Be sure
the trigger is off before connecting
to the air supply. Do not carry the
spray gun with your finger on the
trigger or connect the spray gun to
the air supply with the trigger on.
l Disconnect the spray gun from
the air source before, changing
accessories, cleaning, servicing
or storing the spray gun. Such
preventive safety measures reduce
the risk of starting the spray gun
unintentionally.
l Failure to install appropriate water/
oil removal equipment may result in
damage to machinery or workpiece.
l Always use a pressure regulator on
the air supply to the spray gun.
4XP65B