Speedaire 4XP65B Mode D'emploi

Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product
described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in
personal injury and/or property damage! Retain instructions for future reference.
Speedaire
Spray Gun
For Warranty & Service call 1-888-606-5587
Do Not Return To Branch
Description
Gravity feed spray guns are designed to perform a variety of painting, coating, and
finishing applications using the power of compressed air.
Safety Guidelines
This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger indicates an
imminently
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
Warning indicates a
potentially
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
Caution indicates a
potentially minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
Unpacking
After unpacking the product, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.
Do not operate tool
if damaged during
shipping, handling or use. Damage
could result in bursting and cause injury
or property damage.
Form 5S6321
Gravity Feed
®
General Safety Information
1. Read all manuals
included with this
product carefully. Be
thoroughly familiar with
the controls and the proper use of
the equipment.
2. Follow all local electrical and safety
codes as well as the United States
National Electrical Codes (NEC) and
Occupational Safety and Health Act
(OSHA).
CALIFORNIA PROPOSItION 65
This product
contains chemicals,
including lead, known to the State of
California to cause birth defects and
other reproductive harm. Wash hands
after handling.
You can create dust when
you cut, sand, drill or grind
materials such as wood,
paint, metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
WORk AREA
l Never spray closer
than 25 feet to the
compressor! If possible,
Printed in China
09666
08/537/VCPVP
locate compressor in separate room.
Never spray into the compressor,
compressor controls or the motor.
MANUAL
l Do not spray flammable
materials in vicinity of
open flame or near
ignition sources. Motors,
electrical equipment
and controls can cause electrical
arcs that will ignite a flammable
gas or vapor. Never store flammable
liquids or gases in the vicinity of the
compressor.
l Do not smoke or eat when spraying
paint, insecticides, or other
flammable substances.
l Keep hose away from sharp objects.
Bursting air hoses may cause injury.
Examine air hoses regularly and
replace if damaged.
l Always work in a clean environment.
To avoid injury and damage to the
workpiece, do not aim the spray gun
at any dust or debris.
l Keep visitors away and NEVER allow
children or pets in the work area.
IN268502AV 11/08
4XP65B
E
N
G
L
I
S
H
E
S
P
A
Ñ
O
L
F
R
A
N
Ç
A
I
S