ASROCK P45DE Mode D'emploi page 23

Using SATA / SATAII HDDs with NCQ function
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [AHCI].
®
STEP 2: Install Windows
Insert the Windows ® Vista TM
your system, and follow the instruction to install Windows
on your system. When you see "Where do you want to install Windows?" page, please
insert the ASRock Support CD into your optical drive, and click the "Load Driver" button
on the left on the bottom to load the Intel
following path in our Support CD:
.. \ I386 (For Windows ® Vista
.. \ AMD64 (For Windows ®
After that, please insert Windows
drive again to continue the installation.
2 . 9 2 . 9 2 . 9 2 . 9 2 . 9 Untied Overclocking T Untied Overclocking T Untied Overclocking Technology Untied Overclocking T Untied Overclocking T
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS setup
to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is untied during
overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate under
a more stable overclocking environment.
Please refer to the warning on page 8 for the possible overclocking risk
before you apply Untied Overclocking Technology.
Advanced screen
TM TM
Vista / Vista 64-bit OS on your system.
/ Vista TM 64-bit optical disk into the optical drive to boot
®
AHCI drivers. Intel
TM OS)
Vista TM 64-bit OS)
® TM TM
Vista / Vista 64-bit optical disk into the optical
echnology echnology echnology echnology
ASRock P45DE Motherboard
IDE Configuration.
® Vista TM / Vista TM 64-bit OS
®
AHCI drivers are in the
2 3 2 3 2 3
2 3 2 3