Troubleshooting - Bissell POWERFRESH Guide De L'utilisateur

Troubleshooting

WARNING
To reduce the risk of electric shock, disconnect plug from electrical outlet before performing
maintenance or troubleshooting checks.
Problem Possible causes
Water tank empty
Handle not installed properly
Reduced
steam OR
no steam
Foot not installed properly
Dirty mop pad
Use on waxed or oiled floor
Streaking
Mop pad is too wet
Leaking
Knocking
First use or water tank is empty
Noise
10 10
www.BISSELL.ca
Remedies
Refill tank
Push the handle all the way into the
unit until you hear a click
Insert the body of the machine into
the steam mop foot until you hear
a click
Remove and wash pad per
instructions before further use
If you have used floor polishes or
wax on your floors, steam products
may decrease glossiness. Refer to
the wax or polish manufacturer. If
you don't wax or polish your floors,
check the floor care instructions
from your flooring manufacturer.
Remove and replace with dry mop
pad
Fill water tank and knocking will
diminsh after a few seconds