Rockford Fosgate 550X Manuel D'installation Et D'utilisation page 8

I
NSTALLATION
2-Channel Wiring
• RCA Inputs connect to Front
• Signal Imput Switch set to 2
• Gain - front and rear set equally
• Crossover - front and rear set
identically (example; switch to
LP and frequency at 60Hz)
3-Channel Wiring
• RCA Inputs connect to Front or
Front and Rear
• Signal Imput Switch set to 2 or 4
NOTE: Reverse polarity on subwoofer
if front channel is set to HP
(High Pass) and rear channel
is set to LP (Low Pass)
4-Channel Wiring
• RCA Inputs connect to Front and
Rear
• Signal Imput Switch set to 4
8
Bridged Left
4-Channel
2-Channel
Bridged
Bridged Right