auna multimedia Lumio Mode D'emploi page 16

• Place the device on an even surface with the klens facing a (white) wall, screen or similar in a distance
of about 1.2 - 3.6 meters.
• Connect the power adapter to the DC in and to your home power outlet.
• Connect any signal source via USB, VGA, HDMI (computer, Bluray player etc.) or insert an SD card or
USB drive.
• Press POWER on the device or on the RC to switch the device on. Remove the protection cap from the
lens.
• Press SOURCE to select the respective input source. The OSD will be displayed:
• Use the cursor buttons to choose; press OK to confi rm.
• As the image is displayed, rotate the zoom ring (surrounding the lens) to set the focus and have the
image become as clear as possible.
16
Initial Use & Operation