EN
PLEASE CAREFULLY READ
THIS MANUAL AND KEEP IT
IN A SAFE PLACE.
Congratulations on your purchase of this high quality night vision device. Use this device to view your surroundings in low
light conditions or even in complete darkness with the built-in infrared light. You can even take pictures and video using
the device which can be stored on a micro SD card. This device can also be used to take photos and video during the day.
Use the supplied A/V cable to view your images on a television or download the images to your computer using the
supplied USB cable. Also includes a neck strap and handy storage pouch.
ACCESSORIES
• Night vision device
• A/V cable
• MINI USB cable
• Neck strap
FRONT VIEW
IR button
zoom button
• Storage pouch
• User manual
shutter button
mode button
AV output port
IR-cut cover
8
REAR VIEW
USB port
BOTTOM VIEW
Focus ring
Tripod hole
BATTERY INSTALLATION
• Open battery compartment and install the 4 AA batteries being sure to follow the polarity markings inside the
battery compartment.
• Close the battery cover.
INSERTING / REMOVING THE SD CARD
• Insert the micro SD card into the micro SD card port and push until it locks in place.
• To remove the installed micro SD card, please push the micro SD card inward to release it. Storage capacity: 1GB or
above is recommended
• Note: The device will prompt "Please insert SD card" if the micro SD card in not installed
SD Port
Eyepiece
Battery jar
Eyepiece adjusting
Power switch button
9