Cree C-LITE C-WP-A-FCT3-3L Instructions D'installation page 2

INSTALLATION INSTRUCTIONS
PHOTOCELL OPTIONS
FIGURE 4- For C-WP-A-SL
O-ring
Photocontrol
Additional O-ring
Inside Wall
WIRING
1. Wire according to Single Phase Voltage or Phase to Phase Voltage.
FIGURE 5
SINGLE PHASE VOLTAGE
Voltage
Red
White
Neutral
Driver
Black
(COM)
Neutral Hot
(COM)
Additional Nut
Nut
Threaded
Nipple
Wiring
Compartment
Cover
FIGURE 6
PHASE TO PHASE VOLTAGE
Voltage
Red
White
(COM)
Driver
Black
Hot Hot
http://lighting.cree.com/warranty
Document:
LPN00495X0001A1_A
Created By:
TMT
SHIELD INSTALLATION (C-ACC-A-PCELL-LV and
C-ACC-A-PCELL-HV ONLY)
1. Screw photocell shield onto nipple of photocell.
2. Firmly hand tighten.
NOTE: If fixture does not turn off, drill a slightly larger hole in the
shield.
Photocell Nipple
Photocell Shield
Housing
| 866.924.3645
Date:
01-24-2018
Knurled Nut