Table des Matières
Publicité
SAVE THESE INSTRUCTIONS!
GENERAL SAFETY INFORMATION
(FOR ALL BATTERY OPERATED TOOLS)
WARNING:
Read and understand all instructions. Failure to follow
all instructions listed below, may result in electric
shock, fire, explosion and/or serious personal injury.
It is the responsibility of the owner to make sure all
personnel read this manual prior to using the device. It
is also the responsibility of the device owner to keep
this manual intact and in a convenient location for all to
see and read. If the manual or product labels are lost
or not legible, contact Matco Tools for replacements. If
the operator is not fluent in English, the product and
safety instructions shall be read and discussed with
the operator in the operator's native language by the
purchaser/owner or his designee, making sure that the
operator comprehends its contents.
Work Area Safety
• Keep your work area clean and well lit .
Cluttered benches and dark areas invite accidents .
• Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust .
Power tools create sparks which may ignite the dust
or fumes .
• Keep bystanders, children, and visitors away while operating
a power tool . Distractions can cause you to lose control and
endanger others .
Electrical Safety
• A battery operated tool with integral batteries or a separate
battery pack must be recharged only with the specified
charger for the battery . A charger that may be suitable for
one type of battery may create a risk of fire when used with
another battery .
• Use battery operated tool only with specifically designated
battery pack . Use of any other batteries may create a risk
of fire .
Personal Safety
• Stay alert, watch what you are doing, and use common sense
when operating a power tool . Do not use tool while tired or
under the influence of drugs, alcohol, or medication .
A moment of inattention while operating power tools may
result in serious personal injury .
• Dress properly . Do not wear loose clothing or jewelry .
Contain long hair . Keep your hair, clothing, and gloves away
from moving parts . Loose clothes, jewelry, or long hair can be
caught in moving parts .
• Avoid accidental starting . Be sure switch is in the locked or
"off" position before inserting battery pack . Carrying tools
with your finger on the switch or inserting the battery pack
into a tool with the switch on invites accidents .
• Repetitive motions or exposure to vibration may be harmful to
hands or arms .
• Remove adjusting keys or wrenches before turning the tool
on . A wrench or a key that is left attached to a rotating part
MCL2012DD
MCL2012DD 20V 1/2" Drill Driver
FAILURE TO OBSERVE THESE WARNINGS COULD RE SULT IN IN JU RY.
WARNING
of the tool may result in personal injury .
• Do not overreach . Keep proper footing and balance at all
times . Proper footing and balance enable better control of
the tool in unexpected situations .
• Use safety equipment . Always wear eye protection .
Dust mask, non-skid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions .
Tool Use and Care
• Do not use (or modify) the tool for any other purpose than
that for which it was designed without consulting the
manufacturer's authorized representative .
• Use clamps or another practical way to secure and support
the workpiece to a stable platform . Holding the work by hand
or against your body is unstable and may lead to loss of
control .
• Do not force tool . Use the correct tool for your application .
• Do not use tool if switch does not turn it on or off . A tool
that cannot be controlled with the switch is dangerous and
must be repaired .
• Disconnect battery pack from tool or place the switch in the
locked or "off" position before making any adjustments,
changing accessories, or storing the tool . Such preventive
safety measures reduce the risk of starting the tool
accidentally .
• Store idle tools out of reach of children and other untrained
persons . Tools are dangerous in the hands of untrained
users .
• When battery pack is not in use, keep it away from other
metal objects like: paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection
from one terminal to another . Shorting the battery terminals
together may cause sparks, burns, or a fire .
• Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may affect
the tool's operation . If damaged, have the tool serviced
before using . Many accidents are caused by poorly
maintained tools .
RPM
RPM
RPM
• RPM OF THE ACCESSORY MUST EXCEED TOOL RPM
• Drill bits can bind suddenly and cause rotation of the work
piece or tool, causing injury to arms and/or shoulders .
Enough torque is generated to cause falls . Always use sharp
bits . Use less downward pressure at breakthrough .
• This product may contain one or more chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm . Wash hands thoroughly
after handling.
• Failure to heed these warnings may result in personal injury
and/or property damage .
2
rev. 11/30/16
Publicité
Table des Matières
