Environmental Protection - PROLUMIA PRO-CONE 413801 Serie Manuel D'utilisation

REPLACING LED MODULE AND LED DRIVER
Please note: The LED driver in this fixture is not suitable for use without the presence of a load. Before working on the fixture,
cut off the mains power first.
Replaceable light source (LED only)
by a qualified technician.
1
Open the top side and disconnect
the Male-Female connectors.
3
Remove the lenses and the light source from the
back side of the mounting plate.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
2
Disassemble the LED driver and the mounting plate.
4
www.prolumia.com
Replaceable LED driver
by a qualified technician.
The LED driver and the light source.
7