Operations
In Setting mode
1. Press and hold Delay Start and Sanitize simultaneously for 3 seconds to enter Setting
mode.
2. Keep pressing Sanitize until 'A1' or 'A0' is displayed. Select one between 'A1' (enabled)
and 'A0' (disabled). For better results, select 'A1' (default).
3. Press Delay Start to confirm your changes.
On the control panel
• To activate the Auto Release™ Dry function, press and hold Lower Rack and Hi-Temp
Wash simultaneously for 3 seconds. 'A1' will be displayed.
• To deactivate, press and hold the buttons again for 3 seconds. 'A0' will be displayed.
NOTE
• Once the door opens to let steams out, it cannot be closed manually for the next
2 minutes. This is normal and not a product defect.
• This function is not available with the Rinse Only cycle.
32
English
DACOR_DW9500MD-00196A-00_EN.indd 32
4/25/2017 7:53:01 PM