Hama 00044200 Mode D'emploi page 2

G Operating instruction
1. Controls and Displays
1. Attenuation control for level adjustment
2. Antenna input
3. Four TV connections
2. Safety Notes
• The product is intended for private, non-commercial
use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
• The product is intended for indoor use only.
• Do not use the product in the immediate vicinity of
heaters or other heat sources or in direct sunlight.
• Use the item only in moderate climatic conditions.
• Keep this product, as all electrical products, out of the
reach of children!
• Do not operate the product outside the power limits
given in the speci cations.
• Do not use the product in areas where the use of
electronic devices is not permitted.
• Do not use the product in moist environments and
avoid splashes.
• Do not cover the ventilation openings of the product.
Ensure that the product is adequately ventilated, to
avoid ove
• Do not drop the product and do not expose it to any
major shocks.
• Do not modify the product in any way. Doing so voids
the warranty.
• Keep the packaging material out of the reach of
children due to the risk of suffocation.
• Dispose of packaging material immediately according
to locally applicable regulations.
• Lay all cables so that they do not pose a tripping
hazard.
• Do not bend or crush the cable.
• Always pull directly on the plug when disconnecting
the cable, never on the cable itself.
• The product may only be operated with the type of
power supply network described on the name plate.
• Do not place any ignition sources, such as candles,
on top of the product or in its immediate vicinity.
Risk of re!
• Plan out the installation location for the device
such that the mains plug can be easily reached and
unplugged in case of emergency.
2
• Choose an installation location such that children
cannot play with the device or its connections
unsupervised.
• The installation location must allow for safe routing of
all connected cables.
Risk of electric shock
• Do not open the device or continue to operate it if
it becomes damaged.
• Do not use the product if the
AC adapter, the adapter cable or the mains cable
are damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to quali ed
experts.
Warning
• Only operate the product from a socket that has
been approved for the device. The socket must be
installed close to the product and must be easily
accessible.
• Disconnect the product from the power supply
using the On/Off switch – if this is not available,
unplug the power cord from the socket.
• If using a multi-socket power strip, make sure that
the total power consumption of all connected
devices does not exceed the power strip's maximum
throughput rating.
• If you will not be using the product for a prolonged
period, disconnect it from mains power.
3. Technical Data
Cable t
Ampli cation
max. permissible input level
frequency range
integrated power supply
Built attenuator to adjust the
ampli cation
4x10 dB
80 dBµV
47 - 862 MHz
230 V~ / 50 Hz
/ 3 W
up to - 20 dB