Hendi 230299 Manuel De L'utilisateur page 13

Spare parts, Accessories and Components
• All spare parts and components can be found in
the authorized local dealer, who sold this appli-
ance, or directly in our company.
PROBLEM
The dishwasher does not
operate properly
The appliance operates, but
the switch LED does not light
on
Boiler heating does not operate
Boiler heating operates, but
LED does not turn on
Dispenser heating does not
operate
The 85° thermal fuse is faulty.
The dispenser's fuse is burned
out
Dispenser's heating operates,
but LED does not turn on
• In case of claims or complaints, you should nec-
essarily report the model and serial number of
the appliance / machine. These can be found on
the label that is attached on the appliance.
CAUSE
Connection interruption
You have not turned the switch of
the appliance ON
Main switch / or fuse has not been
activated / or it is faulty
The switch of the appliance is
faulty
The water inlet valve is faulty
The door is not closed
You have not turned the water
supply on
The LED is faulty
Switch or main switch or fuse has
not been activated
The safety thermostat of the boiler
is faulty
The 93° thermal fuse of the boiler
is faulty
Pressure regulator is faulty
"Boiler heating" relay is faulty
Boiler fuse is burned out
Faulty LED
Switch N1 of the appliance or main
switch or fuse has not been
activated
Boiler heating is open
The thermostat switch of 60°
heating is faulty
"Compartment heating" relay is
faulty
Faulty LED
SOLUTION
Check the connection
Turn the switch ON
Check the main switch / or fuse
Refer to the authorized local
dealer who sold the appliance or
directly to the manufacturer
Close the door
Turn the supply on
Change the LED
Check the switch of the appliance
and the main switch or fuse
Refer to the authorized local
dealer or the manufacturer
Refer to the authorized local
dealer or the manufacturer
Refer to the authorized local
dealer or the manufacturer
Change LED
Activate the corresponding
switch or fuse
Wait
Refer to the authorized local
dealer or the manufacturer
Change LED
EN
13