Scope Of Delivery; Intended Use; Cleaning And Maintenance - Kampa Twister Pump Notice D'utilisation

• Do not place the device near naked flames or
other heat sources (heaters, direct sunlight, gas
ovens etc.).
• Do not let the device operate unattended.
• Never pull the plug out of the socket by the
cable.
• The device shall not to be exposed to rain.

Scope of delivery

Pos. in
fig. 1, Component
page 3
1 Pump
2 Separate DC power cord
(Twister pump only)
3 Separate AC power cord
(Twister pump only)
4 Nozzle adapter

Intended use

The pump is intended to be used for inflatables
such as awning tents and tents.
The Twister pump is designed to be operated from
a DC power supply socket of a vehicle or an AC
power supply socket.
The Blast pump is designed to be operated from a
DC power supply socket.
This product is only suitable for the intended pur-
pose and application in accordance with these
instructions.
This manual provides information that is necessary
for proper installation and/or operation of the
product. Poor installation and/or improper operat-
ing or maintenance will result in unsatisfactory per-
formance and a possible failure.
The manufacturer accepts no liability for any injury
or damage to the product resulting from:
• Incorrect assembly or connection, including
excess voltage
• Incorrect maintenance or use of spare parts
other than original spare parts provided by the
manufacturer
• Alterations to the product without express per-
mission from the manufacturer
• Use for purposes other than those described in
this manual
Kampa reserves the right to change product
appearance and product specifications.
Using the electric air pump
A
Quantity
1
1
1
➤For inflation, proceed as shown (fig. 2,
page 3).
3
➤For deflation, proceed as shown (fig. 3,
page 3).

Cleaning and maintenance

A
➤Occasionally clean the product with a damp
cloth.
➤When storing the device, ensure the supply
cord and air hose are not trapped or kinked.
4445103587
NOTICE! Risk of overheating
• Make sure that the pump is sufficiently
ventilated during operation.
• Do not operate the pump continuously
for longer than 25 minutes as the
motor may overheat.
Allow the pump to cool down for
30 minutes after 25 minutes of contin-
uous use.
NOTICE! Damage hazard
• Do not attempt to put any object into
the inflation port as these can damage
the internal pump mechanism.
• Do not use sharp or hard objects or
cleaning agents for cleaning as these
may damage the product.
5