YUNEEC E50 Guide De Démarrage Rapide page 7

Gimbal Installing
Assembling
Step 1.
Find the arrow printed on the top of the damping plate,
which indicates the correct direction for installation.
Step 2.
Slide the E50 in the indicated direction all the way into
the mounting slot, until the E50 is secured by the locking
clip.
Step 3.
Remove the lens protector.
Step 4.
Insert the Micro SD card.
Disassembling
Step 1.
Find the locking clip which is located in front of the
mounting slot
Step 2.
Press and hold the locking clip and push the E50 forward
(the direction shown by the arrow).