Space Seating 25004 Instructions De Montage

FAUTEUIL À INCLINAISON SYNCHRONISÉE
ÉTAPE 1 ÉTAPE 2
13
8
2 x5
11
1
7R
ÉTAPE 4 ÉTAPE 5
13
x3
9
4
12
3
6
1
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les quantités des pièces
sont correctes.
ÉTAPE 1 Insérer les roulettes (2) dans la base (1), et vous assurer que toutes les roulettes (2) sont bien insérées.
ÉTAPE 2 Aligner les trous sur les accoudoirs (7L et 7R) avec les trous sur le coussin du siège (5). Fixer les accoudoirs (7L et 7R) au coussin du siège (5) avec
trois vis d'accoudoir (8) et trois rondelles plates (11) pour chaque accoudoir. RESSERRER COMPLÈTEMENT TOUTES LES VIS D'ACCOUDOIR (8)
AVEC LA CLÉ ALLEN (13).
ÉTAPE 3 Fixer le mécanisme (4) au coussin du siège (5) avec la flèche vers l'avant du siège. Fixer avec quatre vis de mécanique (10). RESSERRER
COMPLÈTEMENT TOUTES LES VIS DE MÉCANIQUE (10) AVEC LA CLÉ ALLEN (13).
ÉTAPE 4 Fixer le support du dossier (12) à l'arrière de la plaque du siège (4) avec trois vis de support de dossier (9).
RESSERRER COMPLÈTEMENT TOUTES LES VIS DE SUPPORT DE DOSSIER (9) AVEC LA CLÉ ALLEN (13).
ÉTAPE 5 Insérer le vérin pneumatique (3) dans la base (1). Placer le siège assemblé sur le vérin pneumatique (3) et mettre de la pression.
ATTENTION : AVANT D'UTILISER LE FAUTEUIL, VOUS ASSURER D'AVOIR RESSERRÉ COMPLÈTEMENT
TOUTES LES VIS.
25004 / 27008
DES GENOUX
INSTRUCTIONS DE MONTAGE
ÉTAPE 3
13
3x 8
10
x3
5
3x 11
x3
7L
PIèCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . . . . 1
4. Mécanisme . . . . . . . . . . . . . . . . . . . 1
5. Coussin du siège . . . . . . . . . . . . . . 1
6. Coussin du dossier . . . . . . . . . . . . 1
7. Accoudoirs (7L et 7R) . . . . . . . . . . 2
8. Vis d'accoudoir . . . . . . . . . . . . . . . 6
9. Vis de support de dossier . . . . . . . 3
10. Vis de mécanique . . . . . . . . . . . . 4
11. Rondelles plates . . . . . . . . . . . . . 6
12. Support de dossier (préinstallé) . . 1
13. Clé Allen . . . . . . . . . . . . . . . . . . . 1
© Office Star Products Juillet 2010
x4
4
3
1
QTÉ
LIMITED WARRANTY
SPACE ® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
To make a warranty claim, contact Parts Department via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the
problem and obtain confirmation number. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Office Star Products.
25004 / 27008
SYNCHRO KNEE TILT CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1) up. To lower seat
height sit on chair and lift lever (1) up.
NOTE: It is normal for chair to slightly lower under
body weight.
• INFINITE LOCKING 2-to-1 SYNCHRO KNEE TILT CONTROL
To lock, turn lever (4 not shown) up. To unlock and free float, turn lever (4
not shown) down. Back reclines at twice the rate of the seat
• TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an adjustment
that will allow the user to change the tension of the tilting feature. Turn
knob (2) clockwise to increase tension and counter-clockwise to decrease
or ease the tension.
NOTE: Be careful not to loosen tilt adjustment knob completely.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (3) in to allow the arms to move up or
down freely. Release the button (3) once the desired height is reached.
• HEADREST ADJUSTMENT
To adjust the height of the headrest, first loosen the adjustment knob at
4
the back of the headrest by turning it counterclockwise. Do not over loosen
the adjustment knob. Move the headrest to a desired height and tighten
the adjustment knob by turning it clockwise. To move the headrest forward
or backwards, first pull the small levers at the back of the headrest to an
up-right position. Then move the headrest to a desired position and press
the levers down to horizontal to secure the position.
2
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three months or
as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover as head
covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.