Fixed Pre-Set Pointers; Adjustable Pointer For The Zero Point Setting; Red Mark Pointer On The Dial - WIKA NS 63 Mode D'emploi

2. Fixed pre-set pointers

2. Fixed pre-set pointers
The setting of the pointer described in this chapter can only be carried out by the manufac-
turer, as well as on site by qualified skilled personnel with calibration instruments.
EN
Unauthorised opening of the case to adjust the pointer will void the warranty!

2.1 Adjustable pointer for the zero point setting

The setting of the adjustable pointer is carried out with the adjustment of the instrument.
Adjustable pointer for the
zero point setting

2.2 Red mark pointer on the dial

Mark pointers indicate the defined limit value of the relevant process.
The position of the red mark pointer on the dial is defined with the order. If there is no defini-
tion for the pointer position, then the red mark pointer will be set to the full scale value.
4
Red mark pointer
Additional information for pointers of dial gauges