Nivian ONV510 Manuel D'installation page 2

EN
Installation Manual
MINI CAMERA with WiFi
Reset button & WPS/QSS
Status LED
5VDC Power input
Microphone
Light Sensor
Lens
Infrared (IR) LED's
INSTALLATION, CONFIGURATION &
VISUALISATION OF THE CAMERA
To install the camera, follow these easy steps:
1. Desktop, wall or ceiling installation
For desktop installation it is only required that you adjust the
base of the camera to the required angle.
For Wall or ceiling installation you must remove the
plate from the rear of the camera and fix with the screws
(provided). Then, it is only necessary to fit the camera back
onto its support plate.
If you wish you can
rotate the camera
image (using the
triangles in the
upper part of the
image) to the right
or left and from top
to bottom for correct
visualisation when
used with a ceiling
support