Features; Uses; Installation Instructions - Hydrofarm ActiveAqua AAPC2010 Mode D'emploi

FEATURES

• Oil free and environmentally safe
• Can also be used inline (non-submersed) below the water level
• Vortex impeller
• Durable impeller can withstand operation in water containing solids and sediment (up to a 6
mm particle size)
• Ceramic bearings for continuous use
• All electrical parts are embedded in a block of plastic resin
• Energy-saving split tube motor
• Overload protection by means of thermal overload trip
• Removable rotor assembly for simple maintenance
• Optimal filtration
• Dual use (submersed and inline)

USES

• Hydroponics
• Aquaponics
• Aquariums
• Fountains and other water features
• Pond filtration
• Home uses
Installation when used submersed:
1. Screw the tubing adapter to the water outlet (the threaded part that emerges straight upward)
from the pump chassis) and attach your outflow tubing to it.
2. The pump must be completely immersed in water with a minimum depth of 6" (15 cm) to
ensure that it does not ingest air.
3. When used in a pond or brook, the pump must be installed on some solid, flat stones a few
inches above the bottom to prevent it from sucking up sand and silt and to keep the filter
(sponge) from becoming clogged.
NOTE: This pump can be used indoors or outdoors. However, when used outdoors, the power outlet
used must be located in a dry place. The minimum distance between the power outlet and the pond
should be 5' (1.5 m).

INSTALLATION INSTRUCTIONS

6
min.1.5m