Windows Xp Users - U.S.Robotics 7900A Guide D'installation

Windows 2000 Users:
Windows 2000 will install the NIC using an existing generic driver. You will now need to update
the driver so that the NIC is using the correct one. Click Windows Start, Settings, and then
Control Panel. Double-click System, click the Hardware tab, and then click Device Manager.
Double-click Network Adapters and then double-click the Realtek Ethernet Adapter in the list.
Click the Driver tab, click Update Driver, and then click Next. Select Search for a suitable driver
for my device (Recommended) and click Next. Select only Specify a location and click Next.
Insert the Installation CD-ROM into your CD-ROM drive. Type D:\ and click OK. If your CD-ROM
drive uses a different letter, type that letter in place of "D." When Windows locates the correct
*
driver, click Next.
After the driver installation is complete, remove the Installation CD-ROM from your CD-ROM drive
and click Finish. You may then be prompted to restart your computer. If you are, click Yes and
your computer will restart to complete the installation procedure.

Windows XP Users:

Windows XP will install the NIC using an existing generic driver. You will now need to update the
driver so that the NIC is using the correct one. Click Windows Start, Settings, and then Control
Panel. Click Switch to Classic View and then double-click System. Click the Hardware tab and
then click Device Manager. Double-click Network Adapters and then double-click the Realtek
Ethernet Adapter.
Click the Driver tab, click Update Driver, and then click Next. Select Search for a suitable driver
for my device (Recommended) and click Next. Select Install from a list or specific location
(Advanced) and click Next. Insert the Installation CD-ROM into your CD-ROM drive. Select Don't
search. I will choose the driver to install and click Next. Click Have Disk, type D:\WinXP and then
click OK. If your CD-ROM drive uses a different letter, type that letter in place of "D." Select
USRobotics 10/100 PCI NIC TX and click Next. When the Windows Logo testing screen appears,
click Continue Anyway.* After the driver installation is complete, click Finish to complete the
installation procedure
Windows 95, UNIX, Linux, and DOS Users:
The Installation CD-ROM includes the drivers for your operating system. On the Installation CD-
ROM, check for an existing folder or look on the root directory for the driver that applies to your
operating system.
*
*You may receive a "Digital Signature Not Found" or "Windows Logo testing" screen. Click Yes or Continue
Anyway. USRobotics has thoroughly tested this driver in conjunction with the supported hardware and has
verified compatibility with Windows 2000, Me, and XP. Because USRobotics wants its customers to take full
advantage of the network card's functionality, it has made the drivers available.
3