Chauvet Professional COLORado 1-Quad Tour Mode D'emploi page 3

COLORado™ 1-Quad Tour QRG
Power Linking
AC Plug
DMX Linking
DMX Connection
Master/Slave
Connection
Mounting
Product
Mounting
Diagram
You can link up to 11 COLORado™ 1-Quad Tour products at 120 V or
21 at 230 V. Never exceed this number. Power linking cords can be purchased
separately.
Connection
AC Live
AC Neutral
AC Ground
The COLORado™ 1-Quad Tour will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.chauvetlighting.com/download/pro.
The COLORado™ 1-Quad Tour uses a regular DMX data connection for its
DMX personalities: TOUR, TR16, FULL, ARC.1, AR1.D, ARC.2, AR2.D,
AR2.S, HSV, PIX1, and PIX2. See the User Manual to connect and configure
for DMX operation.
Note: For optimum control of the 16-bit dimming channels in the TR16 and
FULL personalities, be sure that both dimming curves in SET > DIM and
SET > CURV are set to OFF.
The COLORado™ 1-Quad Tour uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Before mounting this product, read the
clamp is capable of supporting the weight of the product. For our Chauvet line
of mounting clamps, go to
clamps/.
Overhead Mounting
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
Safety
trusst.com/productcategory/base-plates-accessories-
Mounting Clamp
Safety Cable
Secure the safety cable using
the passageway on the back
of the product.
3
Screw Color
Brown Yellow/Brass
Blue
Green
Notes. Make sure the mounting
Floor Mounting
EN
Silver