U.S.Robotics USR7903 Guide D'installation Rapide page 9

I accidentally clicked Cancel during the software instal-
lation.
Possible Solution:
Simply restart the software installation process by clicking Installation on
the U.S. Robotics interface.
My computer is not recognising my new PC Card.
Possible Solution 1:
Make sure that the PC card is seated in the PCMCIA slot securely. Check for
hardware problems, such as physical damage to the card's edge connector.
Try the card in another PCMCIA slot.
Possible Solution 2:
Another network adapter in your computer may be causing a conflict. Unin-
stall and remove the other adapter, then test the new PC card separately.
Are You Still Having Problems?
1. Go to the Support section of the U.S Robotics Web site at
www.usr.com
Many of the most common difficulties that users experience have
been addressed in the FAQ and Troubleshooting Web pages for your
product. The product number of the Gigabit Ethernet CardBus NIC is
7903. You may need to know this to obtain information on the U.S.
Robotics Web site.
2. Submit your technical support question using an online form at
www.usr.com/emailsupport
7