Astralpool PRO-ELYO INVERTER 13 Manuel D'installation Et D'utilisation page 17

ATTENTION:
Disconnect: A disconnect means (circuit breaker, fused or un-fused switch) should be
located within sight of and readily accessible from the unit .This is common practice on
commercial and residential heat pumps. It prevents remotely-energizing unattended
equipment and permits turning off power at the unit while the unit is being serviced.
5.3 Installation of the display deportee
Photo(1)
- The side with plug connects with the control panel (photo1)
- The other side of the signal wire. (photo2)
- Open the wiring panel and put the side without plug through the electrical box. (photo3,4)
- Insert the wiring into the designated position
Photo(2) Photo(3) Photo(4)
(upper right corner) on the PC board. (photo5)
13
Photo(5)