Warning - Optika Italy OPTISCAN10 Manuel D'utilisation

Warning

Check the package content before getting started.
Important! Save the original box, receipt and packing material for future shipping needs.
• Only use the supplied USB-Cable. Connect the computer to the scanner directly using the
USB 2.0 cable.
• Do not use a Hub or extension cable. Only use the USB ports on the rear of desktop
computers.
• If there are any other devices (multifunction device, printers, scanners, webcam)
connected to the computer through USB disconnect them.
• A minimum of 1GB RAM (Windows/Mac) is required.
• Warning! Using any other power adapter may severely damage the scanner and will
void the product warranty.
• Operating Ambient Temperature Range 50° to 104°F (10° to 40°C)
• Operating Ambient Humidity Range 15% to 76% relative humidity (non-condensing)
• Note: If the scanner is stored or to be transported in cold temperature and then brought
into a warm / humid environment condensation may occur.
• Note: Do not turn on the scanner unless it is within this range. If the scanner has been
stored or transported outside of this range, allow it to return to within this range before
turning it on.
Page 3