Asko HPS532S Notice D'utilisation page 17

Instructions
6A. On the washing machine, first undo the feet. Then,
use a fixed spanner (22 mm) to fasten the spacers into
place where the steel feet were previously attached.
6B. On the dryer, undo only the front metal feet. Then,
use a fixed spanner (22 mm) to fasten the spacers into
place where the steel feet were previously attached.
7. Attach the rubber protectors to the spacers to protect
the floor during assembly.
8. Tilt the machine to the other side and repeat steps 5
and 6.
9. Lift the washing machine or dryer with metal feet and
place it on the pedestal drawer. Make sure the spacers
are aligned with the holes.
10. Remove the rubber protectors.
11. Installing the tumble dryer onto the pedestal drawer
(all types expect tumble dryer with metal feet)
Screw in the back feet of the tumble dryer so that they are
in their fully screwed-in position.
Lift the tumble dryer onto the pedestal drawer so that it fits
into holes.
12. Tighten the screw carefully!
Illustration
Hidden Helpers
17