Publicité
Les langues disponibles
Les langues disponibles
CashConcepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau/Germany
Tel.: +49 (0)8382 – 943 15 – 0/Fax: +49 (0)8382 – 943 15 – 20
Email: info@cce.tm/Web: www.cce.tm
Changes in the setup menu
Please change the setup menu only after consultation an engineers of CashConcepts. By the change of the preset values it can
come to false counting or increased refusals of banknotes.
Hold by turning on of the device the "Mode" – button pressed to enter the setup menu. With the help of the "MODE" key you
can navigate between the different sensor settings. By pressure of the key "ADD" you raise the sensitivity or with "BAT" reduce
the delicacy of the suitable sensor.
Message in the display
Width sensitive level
UV sensitive level
MG/MT sensitive level
Color sensitive level
IR sensitive level
Paper sensitive level
By pressing "RESTART" once you enter the currency setting menu. Here you can activate (Display shows "-A-") and deactivate
(Display shows "-0-") the installed currencies by pressing "MODE". By pressing "CUR" you can toggle between the currencies. By
pressing "RESTART" again you leave the setting menu.
Factory setting
If you want to restore the factory settings, please hold by turning on of the device the "CLR" key pressed and then confirm once
with "RESTART". Then the factory settings are loaded again.
Mechanical settings
By the transport and by wear of the transport roles in the upper area a post adjustment of the feeder can be necessary. At the
rear side of the machine is a set wheel which can be easily pressed a little down and changes then by tricks the pressure on the
banknotes. The set wheel must be pressed down while adjusting to prevent unintentional changing of the pressure.
If the CCE 342 draws not only one but also several banknotes, turn the set wheel in the direction of "-" sign and during you press
the set wheel down.
If the CCE 342 does not draw in the banknotes, turn the set wheel in the direction of "+" sign and during you press the set wheel
down.
Sensor
Format (height)
UV – Sensor
MG/MT – Sensor
CIS – Sensor
IR – Sensor
Thickness of the banknote
Factory setting
4
4
2
4
3
3
EN
Publicité
