• The automation control unit does not turn on and the led
remains off.
This may be caused by incorrect connections or electric wires not
fully inserted. Otherwise the battery may be totally discharged, in
which case no signal can be sent: in this case a rapid recharge is
required by means of power supply unit (mod. PBC) or wait for the
photovoltaic panel (connected correctly) to recharge the battery.
• The battery tends to discharge too quickly.
This may depend on excessive ageing of the battery, in which case it
should be replaced; otherwise it may be due to excessively intensive
use of the automation, over the application limits envisaged in this
manual, found in chapter 3.
Otherwise the automation may not be compatible for operation with
PF, or the automation is incorrectly configured for low consumption,
or too many accessories are connected.
In general, this product does not require special maintenance; how-
ever, regular checks over time will ensure system efficiency.
Therefore, to ensure correct maintenance, check every 6 months
that the photovoltaic panel has not accumulated dirt (leaves, sand,
etc.) as this may reduce efficiency.
Also check whether battery replacement is required, as the ageing
process reduces autonomy over time.
Take into account that battery lifetime is influenced above all by high
summer temperatures, which accelerate part ageing. Normally the
average lifetime is approx. 4-5 years; this also depends on the inten-
sity of automation use: The ideal situation is to avoid excessive dis-
charging of the battery due to very frequent and repetitive manoeu-
vre cycles over periods of time.
Product disposal
This product is an integral part of the automation and therefore
must be disposed together with the latter.
As in installation, also at the end of product lifetime, the disassembly
and scrapping operations must be performed by qualified personnel.
This product comprises various types of materials: some may be
recycled others must be disposed of. Seek information on the recy-
cling and disposal systems envisaged by the local regulations in your
area for this product category.
Caution! – some parts of the product may contain pollutant or haz-
ardous substances which, if disposed of into the environment, may
cause serious damage to the environment or physical health.
As indicated by the symbol alongside, disposal of
this product in domestic waste is strictly prohibited.
Separate the waste into categories for disposal,
according to the methods envisaged by current
legislation in your area, or return the product to the
retailer when purchasing a new version.
The product also contains a lead battery, i.e. an element that is high-
ly pollutant if not disposed of correctly. The battery must be removed
and disposed of as specified in the paragraph "Battery disposal".
Caution! – Local legislation may envisage serious fines in the event
of abusive disposal of this product.
5 – English
WHAT TO DO IF... (troubleshooting guide)
• The battery no longer recharges.
This may be due to a malfunction of the photovoltaic panel caused
by incorrect installation, incorrect cable connections, or malfunction
of the battery.
PERIODIC MAINTENANCE OPERATIONS
CAUTION – The battery must be replaced exclusively by skilled
and qualified personnel.
DISPOSAL
Battery disposal
Caution! – The battery contains pollutant substances and therefore
must NEVER be disposed of in common waste collection points
after removal. Dispose of or recycle according to current local stan-
dards.