Husqvarna LC 451S Manuel D'utilisation page 87

LC 551SP
With a cold engine:
• Set the throttle control in the choke position. The
throttle control regulates the engine speed, and
thereby also the rotation speed of the blades.
• The engine brake handle must be held against the
handlebar when the engine is started.
• Position yourself behind the machine.
• Grip the starter handle, slowly pull out the cord with
your right hand until you feel some resistance (the
starter pawls grip). Pull with force to start the engine.
Never twist the starter cord around your hand.
• Set the throttle control to full throttle.
LC 551VBP
With a cold engine:
• Set the throttle control in the choke position.
OPERATING
• Position yourself behind the machine.
• Grip the starter handle, slowly pull out the cord with
your right hand until you feel some resistance (the
starter pawls grip). Pull with force to start the engine.
Never twist the starter cord around your hand.
• Set the throttle control to full throttle.
With a warm engine:
• Use the same starting procedure as for a cold engine
but without setting the choke control in the choke
position.
Drive
• Push the propulsion bar in towards the handle in order
to start the drive.
• To only stop the drive with the engine running, release
only the propulsion bar.
Stopping
LC 451S, LC 451V, LC 551SP
• Stop the engine by releasing the engine brake handle.
LC 551VBP
Move the throttle to the stop posit
–
English 87