What Is Included; Floor Mounting - Chauvet Professional Cloud 9 Manuel De Référence

What is Included

• Cloud 9
• Seetronic Powerkon power cord
• Directional Hose and Clamp
• Quick Reference Guide
AC Power
This product has a fixed voltage power supply and it can work with an input voltage of either 120 VAC, 60 Hz or 230 VAC,
50 Hz, depending on the specific model purchased.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
The 120V version of the Cloud 9 consumes more than 20A of power, and thus requires 2 power
cords, with each on its own circuit to operate.
Resetting the Breaker
This product is equipped with a resettable circuit breaker. If the breaker trips, all sections of this product will lose power.
1. Remove the power cord from mains power.
2. Allow unit to cool for 15 minutes.
3. After 15 minutes, you may attempt to reset the breaker by pressing the button with your finger.
4. Plug the product's power cord into the power outlet and continue using as recommended.

Floor Mounting

Before mounting this product, read the
Floor Mounting Diagram
Cloud 9 QRG Rev. 5
QUICK REFERENCE GUIDE
Safety Notes.
Wheels (x4) for floor
mounting
Floor Mounting
EN
2