Troubleshooting - auna PRO UHF200C Mode D'emploi

EN
26

TROUBLESHOOTING

Problem
No sound.
The output sound is
different from the
sound setting of the
wired device.
Possible cause
The screen is off.
The receiver is off.
The receiver is turned
on and the RF signal
indicator is lit.
The receiver is on
and no RF signal is
displayed.
The receiver signal
indicator A/B lights up.
Suggested solution
Turn on the
transmitter. Make sure
that the batteries are
inserted correctly,
observing the polarity
(+/-). The batteries
may be empty.
Replace them with
new batteries.
Make sure that the AC
adapter is properly
plugged into a wall
outlet. Make sure that
the outlet is working
and has the correct
voltage.
Increase the volume.
Check the connection
cables between the
receiver and external
accessories.
Check that the
transmitter and
receiver display the
same frequency. If not,
move the transmitter
closer to the receiver.
Adjust the gain level
and/or volume of the
receiver.