Shredder Operation - Royal Sovereign RDS-21C10 Manuel Du Propriétaire

Shredder Operation：
1.Remove the unit contents. Place the shredder head on the basket.
2.Plug the power cord into any standard electrical outlet.
3.Place the switch in the AUTO position
The shredder has 3 settings.
a. AUTO - The shredder will automatically begin shredding when paper is inserted into
the feed opening. The Power LED will be ON
b .REV is used to assist in the removal of a possible paper jam. The unit will reverses
the shredding process helping to clear the jam and clear the paper cutter.
c .OFF is used when emptying the shredder wastebasket or when the shredder is not
in use for a prolonged period of time.
Note: The Over Heat LED will turn on and shredding will stop as a safety precaution to
prevent overheating of the shredder motor. You can continue shredding once
the Over Heat LED light turns off.
Shredding Small Items：
This unit shreds 10 sheets at a time. When shredding small items such as envelopes
or credit card receipts, please insert them through the middle of the feed opening.