What's In The Box; Tools Needed; Specifications - Pinnacle Protemp SilentDrive PT-150T-SDR Manuel De L'utilisateur Et Mode D'emploi

Tip: Be sure to remove the axle from the side
of the Styrofoam packaging.
Tip: Use a power screwdriver and locking
wrench for easier assembly.
50 mm Screws (8)
Axle Nuts (2)
Model #
Rating: Btu/Hr
Fuel Consumption: Gal/Hr / L/Hr
Fuel Tank Capacity: Gallons / Liters
Pump Pressure: PSI / BAR
Volts: AC/Hz
Amps
Phase
© 2018 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
®

WHAT'S IN THE BOX

30 mm Screws (2)
Heater (1)
Wheel Support Frame
Axle

SPECIFICATIONS

Specifications subject to change without notice.
WHILE CONNECTED TO A POWER SOURCE

Tools Needed:

- Phillips head screw driver
- 8 mm open end wrench
- 19 mm open end wrench
8 mm Nuts (10)
Spacers (2)
Front Handle
150T-SDR
150,000
1.14 / 4.32
10 / 37.9
111 / 7.65
120VAC ~ 60 Hz
≤3.15A
1Ø
4
Silent Drive Forced Air Heater User's Manual
Safety Guard (1)
Tires (2)
Rear Handle
220T-SDR
220,000
1.67 / 6.3
13 / 49
123 / 8.5
120VAC ~ 60 Hz
≤3.15A
1Ø