Network Setup Wizard - Arcam Solo Neo Manuel

Network
Setup
Wizard
Network Type
Wired
Network Address
Auto (DHCP On)
Navigating the Network
Configuration menus
There are a large number of network
settings, but all are accessed and
adjusted using the following controls:
Go to next menu item
(unless adjusting a setting)
For settings with options (e.g. On or Off;
Manual or Auto):
Change setting
For settings with numbers or letters
(e.g. IP Address; security passphrase)
Select digit to change
Increment/Decrement digit
(number or letter)
Save setting
Note: When all settings have
been adjusted according to
the needs of your network,
the settings must be applied
by navigating to the 'Apply
Settings' screen and pressing
Network
Run Setup Wizard
Network Address
Manual (DHCP Off)
IP Address
O. O. O. O
Subnet Mask
O. O. O. O
Gateway
O. O. O. O
Primary DNS
O. O. O. O
Secondary DNS
O. O. O. O
Apply Settings
Press OK to accept
E19
Network Type
Wireless
Scanning...
Select Network
>WirelessName1
Enter key:
>_
Enter key:
>O
An example key (password) is shown.
Enter your own network key.
NET Radio
Connecting...
Press
to choose a
wireless network.
Contact your Network Administrator,
network installer or Internet Service
Provider if you do not know these settings.
Enter key:
>OO
Enter key:
>1OAF35D6A8D5693