Uniteck UNIFIX 100 B Mode D'emploi page 9

UNIFIX 100 B
Recommended tightening torque
Nb. Mean coefficient of friction µ=0.20 / Clamping at 50% of yield point
• Fix the pieces n°45 and n°46 on the frame of your Unisun solar panel depending on the width
of your panel (see diagram below). Pre-tighten the nuts. The final tightening will be done at the
end of the assembly.
M8x20
Panel width < 560 mm
D8 M8
X4 X4 X4
www.uniteck.fr
N°45 N°46
X1 X1
Width from 560 mm to 680 mm
EN
Screw Torque
M5 5,10 Nm
M 6 8,80 Nm
M 8 21,50 Nm
M 10 44,00 Nm
9