Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SET-UP & CLEANSING BREW
SET-UP
1.
Place the brewer on a counter and plug
into a grounded outlet.
3.
Rinse the Water Reservoir, fill with
bottled or filtered water, and return
it to the brewer. Be sure to fill below
the MAX FILL line and above the
MIN FILL line.
2.
Lift the Handle, remove and discard the
shipping disk.
4.
Press the Power Button and wait
for preheating to complete, about
three minutes.
16
CLEANSING BREW
1.
To begin a cleansing brew, place a
12 ounce mug on the Drip Tray.
3.
Press CONTINUE to dispense hot water.
Select a 8 ounce Brew Size and press the
Brew Button.
SECTION 1
2.
Lift and lower the Handle. Do not place a
Keurig® brand pod in the Pod Holder.
4.
You are now ready to use your brewer!
17
Publicité
Table des Matières
