Setting The Clock; Using The Timer Function - Renkforce 1374126 Notice D'emploi

c) Setting the clock
• Push the PROG button (E). The LED indicator of the PROG button lights up blue and "CLOCK" appears in
the LCD, indicating the clock time set mode is activated.
• Press the HOUR button (B). The LED indicator of the PROG button turns off and the LED indicator of the
HOUR button lights up blue. In order to set the hours, press the HOUR button repeatedly until the desired
hour setting is displayed.
• Press the MIN button (A). The LED indicator of the HOUR button turns off and the LED indicator of the
MIN button lights up blue. Press the MIN button repeatedly until the desired minute setting is displayed.
• Press the PROG button for confirming your last setting. The LED indicator of the PROG button turns off.
The clock time will be saved. After a few seconds "CLOCK" will disappear from the display. The clock
time set mode is completed. The coffee machine will switch to standby with all LED indicators being off.
If not pressing any button within 15 seconds after activating the setting mode, the setting mode
will be cancelled. The coffee machine will switch to standby mode. The clock time will appear
and continues running from the last entered setting. All LED indicators are off.
The digits run faster when pressing and holding the HOUR or MIN buttons respectively.
The clock time is displayed in 24-hour format.
d) Using the timer function
Before using the timer, the clock time must be set!
• Press the PROG button repeatedly until "TIMER" appears in the display, indicating the timer setting mode
is activated.
• Press the HOUR button. The LED indicator of the PROG button turns off and the LED indicator of the HOUR
button lights up blue. In order to set the hours, press the HOUR button repeatedly until the desired hour
setting is displayed.
• Press the MIN button. The LED indicator of the HOUR button turns off and the LED indicator of the MIN
button lights up blue. Press the MIN button repeatedly until the desired minute setting is displayed.
• Press the PROG button for confirming your last setting. The LED indicator of the PROG button turns
off. The start time will be saved. After a few seconds "TIMER" disappears from the display, indicating
that the timer setting mode is completed. The coffee machine will switch to standby mode with all LED
indicators being off and with the current clock time being displayed.
If not pressing any button within 15 seconds after activating the setting mode, the setting mode
will be cancelled. The coffee machine will switch to standby mode with all LED indicators being
off and with the current clock time being displayed.
The digits run faster when pressing and holding the HOUR or MIN buttons respectively.
• Press the ON/AUTO/OFF button two times to activate the timer. Brewing will start at the pre-set time. The
LED indicator of the ON/AUTO/OFF flashes blue first and lights up red once brewing starts.
• You can display the pre-set time in timer set mode. Press the PROG button repeatedly, until "TIMER"
appears in the LCD.
28