Before First Time Use; Operation; Installation And Connection - Renkforce 1374126 Notice D'emploi

10. Before first time use

• Carefully unpack the product and check it for completeness and potential damage. Do not use the coffee
machine or glass jar if damaged.
• Rinse the coffee machine before first time use: Refer to chapter "b) Brewing and keeping warm coffee".
But do not fill the permanent filter (8) with coffee powder; leave it empty. After brewing, dispose of the
hot water in the glass jar. Perform this procedure two times in order to remove any production residue.
• Clean the product and all removable parts as described in chapter "13. Maintenance and cleaning".
• The product is now ready for use.

11. Operation

a) Installation and connection
Never let the product get in contact with hot surfaces (e.g. stove).
Only use the product on a dry, flat, heat-resistant and stable surface.
There are anti-slip feet on the bottom of the device. If necessary, place a protective mat
underneath the device in order to protect the surface of the worktop.
• Fully unwind the cable (13).
• Install the coffee machine (5) near a wall socket.
• Place the glass jar in the center of the keeping-warm plate (14).
• Connect the mains plug to the wall socket.
• The LCD (C) lights up. "12:00" appears in the LCD.
26