Fixman PROFESSIONAL 49050 Manuel Du Propriétaire page 26

Compressor (cont'd)
TROUBLE SHOOTING (cont' d )
Overheating
Poor ventilation
Relocate compressor to an area with cool, dry and well-circulated air.
Dirty cooling surface
Clean all cooling surfaces of pump thoroughly.
Leaking valve
Replace worn parts and reassemble with new seals.
Motor stalls
Low voltage
Furnish adequate power.
Defective pressure switch bleeder valve
Replace pressure switch bleeder valve.
Pressure relief valve opens
Tank pressure exceeded normal operating pressure
Replace pressure switch
Motor will not run
Tank pressure exceeds present pressure switch limit
Motor will start automatically when tank pressure drops below kick-in pressure tank.
Motor overload protection has tripped
Let motor cool off and overload switch will automatically reset. This may take several minutes.
26
OWNER'S MANUAL