Grounding Instructions - Fixman PROFESSIONAL 49050 Manuel Du Propriétaire

Compressor (cont'd)
Electrical Power Requirements (cont' d )
Extension Cord
Use the chart on the right for the proper
extension cord length.
Use only a 3-wire extension cord that has
a 3-blade grounding plug and a 3-slot receptacle
that will accept the plug of the product.
Make sure your extension cord is in good condition.
An undersized cord will cause a drop in line voltage
as well as a loss of power and overheating.
The smaller the gauge number, the heavier the cord.

Grounding Instructions

This product is equipped with a cord having a grounding wire an appropriate grounding plug. The
plug must be plugged into an outlet that is properly installed and grounded in accordance with all
local codes and ordinance.
This product is for use on a nominal 110 volt circuit. An outlet having the same configuration as the
plug. No adapter should be used with this product. Do not alter the plug to fit into a non-Ground or
2-slot receptacle.
20
OWNER'S MANUAL
WARNING! IMPROPER INSTALLATION OF THE GROUNDING PLUG CAN RESULT IN A RISK
OF ELECTRIC SHOCK. IF REPAIR OR REPLACEMENT OF THE CORD OR PLUG IS NECESSARY,
DO NOT CONNECT THE GROUNDING WIRE TO FLAT BLADE TERMINAL.
THE WIRE INSULATION HAVING AN OUTER SURFACE THAT IS GREEN WITH, OR WITHOUT,
YELLOW STRIPES IS THE GROUNDING WIRE.
AMP
RATING
(120 Volts)
10-12
12-14
14-16
16-18
18-20
LENGTH OF
CORD IN FEET
25' 50' 100' 150'
16 14 10 8
16 12 10 8
16 12 10 8
14 12 8 8
14 12 8 8