Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
lcD Screen: 3.2" TFT LCD screen.
1.
2.
power Button: Press and hold for 3 seconds to turn the instrument on
and off.
3.
Bright plus Button: Increases the brightness of the camera-mounted
LEDs up to 10. Deletes photos or videos in the file explorer mode.
4.
Bright Minus Button: Decreases the brightness of the camera-mounted
LEDs down to 0 (off).
5.
ok Button: Accepts the current selection on screen. Enters menus. Play
and pause in video playback mode.
6.
eSc Button: Returns to live video mode from top level menu. Returns
to submenu from file explorer mode.
left Button: Flips screen 180 degrees in live video mode. Moves left or
7.
up one selection. Moves to the previous video or photo in the list while
viewing a file.
right Button: Flips screen 180 degrees in live video mode. Moves right
8.
or down one selection. Moves to the next video or photo in the list
while viewing a file.
Battery cover: Pulls back to reveal the battery container.
9.
photo capture trigger: Press momentarily to capture a photo in live
10.
preview mode. Increases value in video settings mode and time mode.
Toggles between internal flash memory and SD card in memory mode.
Video capture trigger: Press and hold for 1 second to begin or end
11.
video capturing in live preview mode. Decreases value in video settings
mode and time mode. Toggles between internal flash memory and SD
card in memory mode.
camera Head: Contains the CMOS sensor and LEDs. The arrow on top
12.
indicates the camera is right-side up.
Gooseneck: Rated to IP67 to withstand all ingress of dust and
13.
submersion in water up to 1 meter. Caution: bending the gooseneck to
90 degrees or greater can permanently damage it.
camera output: Attaches to borescope body when the notch is
14.
oriented correctly.
15.
camera Input Socket: Screw into place once the camera output plug is
inserted.
16.
tV & Headphone out: Insert a standard 1/8" headphone jack or the
included component video adapter.
17.
SD card Slot: Insert an SD or SDHC card with 32GB capacity or less to
store more video or photos.
18.
USB & charging port: Attach the borescope to a computer via USB to
charge and transfer files. Attach to included 5V adapter to charge via a
standard outlet.
19.
reset Button: Perform a hard reset of the borescope.
featUre layoUt
5
Publicité
Table des Matières
