Figure 29
00 00
Figure 30
P
Q
88 88
Figure 31
T
U
Place the appliance on a flat, stable surface that can
withstand high temperatures, located at a safe dis-
tance from other sources of heat or possible water
splashes.
ON / OFF
Do not cover or obstruct the ventilation grills located
SWITCH
at the rear of the appliance.
1. Connect the appliance to the power supply.
2. Turn the appliance on by pressing the start /stop
switch
test with the digital display reading 00:00
The appliance is now ready to operate.
Digital screen
(Figure 31)
Function icons at the top:
R
P Blades activated.
Q Heating activated.
R Timer activated.
Control display icons in the centre:
S Timer
Information icons in the bottom:
T Jug missing, not properly covered or improperly
fitted onto the central unit.
U The jug and the temperature sensor are hot.
V
S
V Timer finished.
Time selector control
(Figure 32)
Turn the control slowly to the right to select the ope-
ration time.
Maximum: 90 minutes.
Turn the control slowly to the left to reduce the time.
(Figure 29).
The appliance carries out a self-
13
ENGLISH
(Figure
30).