Setup Instructions - Belkin TuneStage Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Setup Instructions

Wall-Mounting the TuneStage 2 Receiver (Optional)
1. Make sure the antenna is pointed upward.
2. You can hang the Receiver on a wall using two screws (not included).
3. The cables should run through the channel on the bottom of the Receiver, so they are held
securely to the wall.
3.2 in. (80mm)
Setup Instructions | 04

Publicité

Table des Matières
loading

Table des Matières