Unpacking Instruction; Controls And Connections - Fenton 170.018 Manuel D'instructions

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

CONTROLS AND CONNECTIONS

1. MASTER VOLUME
Adjust the overall output level.
2. 5VDC POWER INPUT
Connector for inserting the supplied power cord.
3. MODE / LED BUTTON
Press this button to switch between USB-, AUX- and BT modes.
Press and hold for 3 seconds to turn the LED light show on/off.
4. NEXT TRACK
Press to select the next track.
5. PLAY/PAUSE/STEREO PAIRING
Press button to start/resume or pause playback.
6. PREVIOUS TRACK
Press to select the previous track.
7. USB PORT
Connect your USB drive to this slot to play music with MP3-format in
USB mode.
8. SD CARD
insert a SD Card
9. MICROPHONE VOLUME
Turn to adjust the microphone volume level.
10. ECHO CONTROL
Turn to adjust the intensity of the echo effect.
11. AUX INPUT
3.5mm auxiliary line input jack.
12. MICROPHONE INPUT
6.3mm jack input for connecting a microphone.
REMOTE
1. STAND-BY BUTTON
Use this button to put the unit into or out of standby mode.
2. MODE BUTTON
Press to switch between BT/USB/SD modes.
3. PREVIOUS & NEXT BUTTONS
Press to change to previous or next track.
4. MASTER VOLUME CONTROL
Adjust the overall output level of the sound system.
5. NUM PAD
Numeric keyboard for selecting presets.
6. PLAY/PAUSE
Press this button to start or pause play.
7. EQUALIZER
Press to use EQ function.
8. ENTER button
Press to confirm.
9. MUTE
Press to mute the device.
10. STOP
Press to stop.
BT CONNECTION
1. Activate the BT on your device (Mobile phone, tablet etc.) which you want to play the music.
See the operating instructions for that device.
2. Press the "MODE" button and activate the BT-function.
3. Select "FT8LED" on your BT device and pair.
Attention: BT distance is approx. 10meter without any barrier.
4