Unpacking Instruction; Controls And Connections - Fenton FT208LED Manuel D'instructions

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

CONTROLS AND CONNECTIONS

1. LCD Display
2. BUTTON SELECTION
3. TF CARD
Insert a TF card here.
4. USB PORT
Connect your USB drive to this slot to play music with
MP3-format in USB mode.
5. AUX INPUT
3.5mm auxiliary line input jack.
6. MICROPHONE VOLUME
Turn to adjust the microphone volume level.
7. MASTER VOLUME
Adjust the overall output level.
8. TREBLE KNOB
Turn to adjust the higher tones.
9. BASS KNOB
Turn to adjust the lower tones.
10. MIC VOL
Turn to adjust the intensity of your microphone volume.
11. ECHO CONTROL
Turn to adjust the intensity of the echo effect.
12. LIGHT SWITCH
13. POWER SWITCH
14. EXTERNAL POWER SUPPLY
15. 5VDC POWER INPUT
Connector for inserting the supplied power cord.
REMOTE
1. STAND-BY
Use this button to put the unit into or out of standby mode.
2. MODE
Press to switch between BT/USB/SD modes.
3. NUM PAD
Numeric keyboard for selecting presets.
4. EQUALIZER
Press to use EQ function.
5. MUTE
Press to mute the device.
6. USB/TF
Select the usb or tf card.
7. PREVIOUS
Press to change to the previous track.
8. PLAY/PAUSE
Press this button to start or pause play.
9. NEXT
Press to change to the next track.
10. VOLUME + CONTROL
Adjust the output level higher on the sound system.
11. VOLUME - CONTROL
Adjust the output level lower on the sound system.
12. MASTER VOLUME CONTROL
3