Ricoh RPIP Interface Box Type S3 Manuel Utilisateur page 7

• The type and number displayed for Step 4. [Output tray:] differs depending on the machine
model. For more details, refer to Connecting the Machine/ System Settings > System Settings >
General Features, the manual of this MFP or Printer that supports this function.
Selecting from the printer driver
If the print settings screen is displayed from [Open from [Start]] or [Open from application] on [Select
functions for extended option], make selections following the procedure shown below:
1. Click the [Detailed Settings] tab.
2. In the "Menu:" box, click [Output Settings].
3. Select [Extended Option's Tray] from the [Output Tray:] drop-down menu.
Selecting from Web Image Monitor
If the top page of Web Image Monitor is displayed using [Select functions for extended option], make
selections following the procedure shown below:
1. In the menu area, click [Confi guration] on the [Device Management] menu.
2. Under "Device Settings", click [System].
3. Select [Extended Option's Tray] from the drop down menu for each item under [Output
tray]
• The type and number for each item under [Output tray] differs depending on the machine model
you are using. For more details, refer to Connecting the Machine/ System Settings > System Set-
tings > General Features, the manual of this MFP or Printer that supports this function.
Select functions for extended option
• The functions for the Extended option have been specifi ed by the service representative upon
installation of this product.
• For the functions available with the Extended option, read its manual.
Connecting Finishing Peripherals
5