Installation - KLASS Fan MOVERICK Instructions D'utilisation

INSTALLATION

CHOOSE A PROPER LOCATION FOR THE CEILING FAN
Choose the perfect spot to place your fan and take all the necessary safety
precautions before beginning the installation.
Once all the precautions are taken, trace your drill holes, using a pencil, through
the bracket by placing it on the ceiling.
WARNING
• Make sure electricity is turned off at the main power box before
starting work. Turn off the power by removing fuse or turning off
circuit breaker before installing the fan and replacing the lamps.
• To ensure a good electrical protection to your fan it is essential to
install a wall switch.
• Make sure that the circuit breaker of the line on which you want to install
your fan is tripped, to avoid damages or danger in case of overvoltage.
• The lowest point on the fan blade must be at least 2.3 m (7.5ft)
from the floor.
• Make sure that ceiling joists are strong enough and of adequate size
to support the weight of the fan of about 40kg.
FAN INSTALLATION INSTRUCTIONS
1
Secure mounting plate to ceiling joist
or suitable piece of timber inserted
between the ceiling joists. The mounting
plate should be attached with four
wood screws and washers supplied.
Concrete ceiling, According to the
length if expansion screws, bore holes
by percussive drills with Ø8mm drill.
After that, fix the hanger bracket on
ceiling by expansion screws.
15