Speedlink USB Web Phone Mode D'emploi page 9

Introduction
Thank you for purchasing the USB
Phone. Now you can navigate within
your preferred VoIP program without
needing to use a mouse or keyboard
– dial and take or make calls just like
you would on a normal telephone.
Features
 USB Phone for that 'real telephone'
look and feel
 Large display with call information,
time, day and date
 Buttons for call pick-up, cancel and
menu navigation
 Number pad with # and * buttons
 LED to indicate call acceptance
 Navigate using the USB phone
without the need for a mouse or
keyboard
 1.4m cable – gives you freedom to
move around
Connecting to the PC
Connect the USB connector on the
Phone to any free USB port on your
PC. Windows will automatically detect
the Phone. Windows may ask you to
insert the original Windows installation
CD. Read the following instructions be-
fore you install the driver.
Installation under
Windows 2000/XP
 Insert the supplied driver CD in your
CD-ROM drive. The setup menu will
load automatically (if this doesn't
occur open Windows
navigate to your CD-ROM drive and
then double click on the file setup.
exe)
 Click on the button named driver..
The InstallShield Wizard will now
guide you through the installation
process
 Select the target directory where the
driver should be installed and then
click on Next
 After the driver has been installed
click on Finish to complete the
installation of the diver
 Click on OK and reboot your
computer
9
Explorer,