Table Des Matières; Product Specifications - Gyration GO Guide De L'utilisateur

GC1005M_NA_IB_REVA_K6.qxd 2/11/05

PRODUCT SPECIFICATIONS

Spec GO 2.4 GHz Wireless Optical Mouse
System Requirements • IBM compatible PCs running Windows 98 (Second Edition), 2000, ME, XP or higher
• Available USB port
• CD ROM drive (for GyroTools installation on Windows only*)
• Microsoft or Mac compatible mouse driver (no additional drivers to install)
Size 5.25" L x 2.28" W x 1.81"H
(133 mm x 58 mm x 46 mm)
Weight 4.73 ounces (134 g)
Up to 30' (9.144 m) typical with no
Operating Range
line-of-sight requirement
Professional - Up to 100' (30.5 m)
typical with no line-of-sight requirement
Radio 2.4 GHz (U.S.) with automatic
channel selection
Batteries NiMH Battery Pack (Note: An additional
NiMH battery is included in the G.O.
Professional model only)
Connector
N/A
Operating Temp +10 to +40 C (+50 to +104 F)
Storage Temp -30 to +70 C (-86 to +158 F)
*The E-Mail tool in GyroTools is not supported under Windows 98 (Second Edition).
Note: 49 MHz mouse, keyboard and remotes are not compatible with the 2.4 GHz RF Receiver.
11:33 AM Page 2
RF Receiver
70'' L x 1.18'' W x .35'' H
(178 cm x 3 cm x .9 cm)
.53 ounces (15 g)
N/A
2.4 GHz (U.S.)
N/A
USB
TABLE OF CONTENTS
GO 2.4 GHz Cordless Optical Air Mouse...........................................1
Key Features .................................................................1
Installing and Charging the Batteries...........................1
Setting Up and Synchronizing .....................................4
Powering On and Off ..................................................5
Using on the Desktop ................................................6
Using in the Air..........................................................7
Fine-Tuning Cursor Control..........................................8
™
GyroTools Software...................................................9
RF Receiver.........................................................................................11
Connect Button ...............................................................11
Status LED .....................................................................11
Troubleshooting .................................................................................13