Lindy 20376 Manuel Utilisateur page 2

User Manual
Introduction
Thank you for purchasing the LINDY USB DAC (Digital-to-Analogue Audio Converter) with USB
connectivity & head phone amplifier. The DAC converts digital PCM (Pulse Code Modulation) audio to
stereo audio signals and acts a USB digital audio interface allowing you to connect your analogue audio
system to a wide range of digital audio sources.
Features

Provides audiophile sound quality up to 24bit/192kHz

Accepts 2 channel digital audio and works with any PCM stream with Dolby Digital or DTS disabled

Optical, Coaxial and USB Digital Audio interfaces

Input selector switch and headphone volume control

USB 2.0 interface compatible with Windows XP/Vista/7/8/10 and Mac OS X

Can be powered via the USB bus or an additional USB power supply (not included)
Package Contents

LINDY USB Digital to Analogue Audio Converter

USB Type A/B Cable, 1m

This manual
Specification

Input ports: 1 x USB Type B, 1 x TOSLink (Optical Fibre), 1 x Coaxial

Output ports: 2 x Phono Left & Right, 3.5mm Headphone Socket

Integrated Digital to Analog Converter (DAC)

USB Audio Interface

Supports 2 channel LPCM

24-bit incoming bitstream on left and right channels

Sampling Frequency (or Supported Sample Rates)
o Toslink/Coaxial SPDIF 44.1 – 192kHz
o USB 44.1 – 96kHz

Headphone Sound Output Power:
o 60mW @ RL=16Ohm THD <0.1%
o 30mW @ RL=32Ohm THD <0.1%

Volume Control dial
English