Tekmar Net 553 Guide De Démarrage Rapide page 4

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8.
Critical Settings
The following settings are essential to the successful operation of the system.
Step 1: Set switch setting #1 and tekmarNet
room to Unlock to change Access level to Installer. Return to Lock setting once installation
has been completed.
Step 2: Press and hold "Home" button for 3 seconds to enter programming menus.
Step 3: Touch NEXT to locate the Setup Menu and touch ENTER.
Setup Menu Settings
SENSOR 1
Select the type of sensor connected to
auxiliary sensor input 1.
SENSOR 2
Select the type of sensor connected to
auxiliary sensor input 2.
ROOM SENSOR
Select if the built-in room temperature
sensor is on or off.
HUMIDITY SENSOR
Select if the built-in humidity sensor is
on or off.
Y RELAY
Select the cooling equipment the Y relay
operates.
W TERMINAL UNIT
Select the terminal unit type of the first
stage of heat W.
ACC RELAY
Select the operation of the accessory
relay.
W2 TERMINAL UNIT
Select the type of backup heating.
W2 SOURCE
Select the second stage W2 hydronic
heat source.
G/O RELAY
Select the equipment the G / O relay
operates.
For a full list of settings and operational details, please refer to the thermostat
Installation and Operation Manual (553_D) available from www.tekmarControls.com
All specifications are subject
to change without notice
Product design, software and literature are Copyright ©2014 by tekmar Control Systems Ltd.,
A Watts Water Technologies Company. Head Offi ce: 5100 Silver Star Road, Vernon, B.C.
Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650 Web Site: www.tekmarControls.com
®
system control located in the mechanical
Range
OFF, ROOM, FLOR
(floor), COIL, DUCT
OFF, ROOM, FLOR
(floor), OUT (outdoor)
OFF or ON
OFF or ON
OFF, HP (heat pump),
AC (air conditioner), HUM
(humidity)
NONE, HRF1, HRF2,
CONV, COIL, FURN,
OTHR
OFF, W2, HUM, DHUM,
HRV, FAN
CONV, COIL, FURN
(furnace), OTHR (other)
BOIL, TANK, MIX
FAN or OFF
(conventional heating)
O or B (heat pump)
4
Default
OFF
OFF
ON
ON
AC
HRF1 (tekmarNet
System Control)
OTHR (standalone)
W2
FURN
BOIL
FAN (conventional)
O (heat pump)
553_Q - 02/14.
®

Publicité

Table des Matières
loading

Table des Matières